New RF Materials Offer Options for RF Designers
April 29, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes

The RF materials arena has changed quite a bit in the past decade. The newest thermoset laminates boast performance numbers that are almost competitive with PTFE, but without the manufacturability challenges.
At IPC APEX EXPO this year, I spoke with Brent Mayfield, business development manager at AGC Multi Material America. Brent walked through some recent innovations in RF materials, advances in resin systems, and the many design trade-offs for RF engineers to consider for each material set.
Andy Shaughnessy: Brent, this issue focuses on RF design techniques. What are your thoughts on the RF materials landscape and the challenges your customers are facing?
Brent Mayfield: Traditionally, much of the RF business has been focused on aerospace and defense. The RF material sets have historically been considered unfriendly to the fabrication process, which limited commercial adoption. As things have expanded, RF applications have spread across all electronics. The commercial side is now leaning into phased arrays and trying to do what the military has been doing for decades, when they were typically using PTFE materials. Often, with these high-performance phased arrays, you weren’t getting what you wanted with yields, but it was the only way to get the performance. The thermoset materials that were available at the time really couldn't achieve that type of performance.
Around 2015, we started seeing a turn toward high-speed digital materials, and then it became a lot easier to build RF products. But there are still performance challenges. We always ask, “What do you need to achieve from the material?” Often the response is, “We need it to be ultra low-loss.” If you're looking for what you could have gotten with PTFE, you won’t quite get that. While the Df specification for the latest thermosets is getting close, there are mechanical performance characteristics that just don’t match up. For instance, with PTFE, you have very good adhesion to copper foils with minimal roughness. With thermosets, you just can't achieve the same level adhesion of copper. It's about trying to strike a balance. How do you know what will work? If I go to consumer goods, it's considered a high-end product where they will deal with drop tests. With a radio for first responders, the drop test is much higher. How do we deal with this type of issue? Often, we start by focusing on electrical performance, but when we get to mechanical performance for different types of applications, we see that there are limits to what we can do.
We have to do a lot more engineering work. Even in the defense industry, there's a lot more volume using high-performance thermosets. Added to that are the commercial OEMs looking closer at the cost. What's the manufacturability? That's our focus. PTFE isn’t going away. There are some very special things about PTFE; it is still best for high-power—high-power antennas, RF power amplifiers, high-power couplers, etc. But the thermoset will lead the way from a volume perspective if that isn’t already happening. How do we start bettering some of the performance characteristics from a mechanical standpoint so that these thermosets can do some of the things that maybe you're still reserving for PTFE now?
To continue reading this interview, which originally appeared in the April 2025 Design007 Magazine, click here.
Suggested Items
L3Harris Receives Contract to Develop Next-Generation Security Processor for US Government
06/02/2025 | L3Harris TechnologiesL3Harris Technologies has been awarded a contract by the U.S. government to develop a next-generation security processor to secure communication devices across the globe.
Hon Hai Research Institute Partners with Taiwan Academic Research Institute and KAUST to Participate in CLEO 2025
05/30/2025 | FoxconnThe research team of the Semiconductor Division of Hon Hai Research Institute, together with the research teams of National Taiwan University and King Abdullah University of Science and Technology in Saudi Arabia, has successfully made breakthroughs in multi-wavelength μ -LED technology to achieve high-speed visible light communication and optical interconnection between chips.
Advancements in High-reliability Alloys for Automotive and High-performance Applications
05/22/2025 | Barry Matties, I-Connect007At IPC APEX EXPO, MacDermid Alpha Electronic Solutions showcased its latest innovations in SMT assembly materials designed to meet the growing demands for reliability and sustainability in automotive and high-performance applications. In this interview, Ebad Rehman, business product manager, discusses the evolution of high-reliability alloys, spotlighting ALPHA Innolot, a proven solution developed in response to the automotive industry’s increasing expectations for durability and performance under harsh operating conditions.
FocalPoint Announces Strategic Collaboration with STMicroelectronics to Deliver an Enhanced GNSS Solution for Automotive
05/20/2025 | PRNewswireFocalPoint, a UK-based software company providing next-gen positioning solutions for automotive, wearables and smartphones, has announced a strategic collaboration with STMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications.
Indium to Feature Power Electronics Solutions at SEMICON Southeast Asia 2025
05/19/2025 | Indium CorporationAs a trusted leader in materials science for advanced electronics assembly, Indium Corporation® is proud to showcase its innovative power electronics solutions at SEMICON Southeast Asia 2025, May 20–22, in Marina Bay Sands, Singapore.