AT&S Sets New Standards in the Recycling of Copper and Chemicals
March 25, 2025 | AT&SEstimated reading time: 1 minute

AT&S has been working for years to reduce the ecological footprint of its production sites worldwide with a comprehensive sustainability strategy and considerable investments. The technical upgrading of the wastewater and waste treatment plants at the sites is now bringing considerable success: in the financial year 2024/25 alone, 268 tons of copper, 170 kilograms of gold, 35 kilograms of palladium, 16 kilograms of silver, 284,000 liters of iron(III) chloride and 984,000 liters of hydrochloric acid have been recycled so far globally. This also reduces the amount of wastewater sludge, which would be expensive and time-consuming to dispose of. In addition to the recycling of metals, it is possible to recover up to 1.5 million m3 of water per year using water recycling plants. These figures will continue to rise in the coming years.
“As part of our comprehensive sustainability strategy, we are constantly analyzing where there is further potential for improvements in energy and raw material efficiency. With our outstanding engineers, we then independently develop tailor-made solutions, which we first test at individual sites and then roll out globally. The treatment plants for metals, chemicals and water that we enhance along these lines show that we are really on the right path here. In the coming years, our production will become even greener,” says Marina Hornasek-Metzl, VP Corporate ESG and Quality at AT&S.
84 tanker trucks and 6,700 kilometers of cable saved
By developing and using state-of-the-art recycling technology, AT&S is not only improving its own ecological footprint and cost accounting. If fewer raw materials have to be purchased through efficient reprocessing, CO2 emissions and energy consumption for the production and transportation of resource purchases are also reduced. By reusing ferric chloride and hydrochloric acid alone, long delivery trips of 84 tankers full of chemicals with a capacity of 15,000 liters each could be avoided. The saved copper purchases would be sufficient to produce a 6,700 kilometer long cable with a cross section of 3 x 1.5 millimeters. AT&S thus achieves a positive sustainability effect along the entire supply chain and can play an active role in shaping a green, livable future worldwide.
Suggested Items
CACI’s Mission-Critical Technology will Accelerate the Delivery of Electronic Warfighting Capabilities to the U.S. Navy’s Existing Fleet
05/13/2025 | CACI International Inc.CACI International Inc announced today that it has been awarded additional work by the U.S. Navy to procure enhancements to the current fielded Shipboard Information Warfare Exploit system under its existing contract for Spectral, a next-generation shipboard signals intelligence (SIGINT), electronic warfare (EW), and information operations (IO) weapon system.
Innovative Technology Advancements in Test: HATS² Technology and Its Impact on Reliability Testing
05/14/2025 | Barry Matties, I-Connect007Ensuring the reliability of printed circuit boards (PCBs) has become increasingly difficult and critical, yet the development of advanced testing methodologies is essential to meeting industry demands and addressing persistent challenges. One significant innovation is the High Acceleration Thermal Shock (HATS²) test system, which transforms how reliability testing is conducted. After 40 years in the testing business at Microtek, Bob Neves is beginning a new journey with his company, Reliability Assessment Solutions Inc. (RAS).
The Shaughnessy Report: Solving the Data Package Puzzle
05/12/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you ask fabricators about their biggest challenges, they’ll often point at PCB designers—the readers of this magazine. Yes, you! Why is it so difficult to create the ideal data package? It’s a fairly straightforward task. But this part of the design process keeps tripping up designers, even those who started in the industry before Pink Floyd split up.
AT&S Starts High Volume Manufacturing at New Plant in Kulim/Malaysia
05/06/2025 | AT&SAT&S Austria Technologie & Systemtechnik (Malaysia) Sdn Bhd is ready to start high volume manufacturing at the new campus at Kulim Hi-Tech Park (KHTP) in the state of Kedah. AT&S Malaysia delivers high-end Integrated Circuit (IC) Substrates for AMD’s data center processors and other customers.
Northrop Grumman’s IVEWS Completes F-16 Electronic Warfare Operational Assessment
05/05/2025 | Northrop GrummanNorthrop Grumman Corporation’s IVEWS (Integrated Viper Electronic Warfare Suite) has successfully completed Operational Assessment flight testing on U.S. Air Force F-16 aircraft, demonstrating its effectiveness against advanced radar-guided threats.