PCB Layout Rules of Thumb for Consideration
November 25, 2024 | Patrick Davis, Cadence Design SystemsEstimated reading time: 1 minute

Just because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
While many aspects of PCB layout are governed by procedures, standards, and workflows, there is still much that belongs only to tribal knowledge. Unless this knowledge is collected, documented, and incorporated into a design database, it will only exist in the information that gets passed from one designer to the next. Let’s take a look at some of the more common PCB layout rules of thumb and see how they apply to the boards we are currently laying out.
Start with a Plan
Something that you probably won’t ever find printed in a company procedure or a PCB design tutorial is the importance of having a plan before you start. Many layout designers have been known to plunge right into a new design, without first considering all the ramifications of what they are doing. This can lead to routing frustrations and eventual changes to the placement to complete the design correctly. To avoid problems like these, give some thought to what you are trying to accomplish before you start placing parts.
To read this entire article, which appeared in the November 2024 issue of Design007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2025: Creative Approaches to Measuring Thermal Warpage
03/31/2025 | Real Time with...IPC APEX EXPONeil Hubble discusses his research on measuring thermal warpage which focuses on challenges in testing small, thin samples. He introduces non-destructive testing methods that effectively measure without damaging components. Neil highlights the industry's growing interest in AI and outlines future technology goals, including improved resolution and automation to enhance production efficiency.
IPC APEX EXPO 2025 Review: Expecting the Unexpected
03/31/2025 | Tom Kastner, GP VenturesOne of the best things about trade shows is not the scheduled meetings but the chance meetings that come up unexpectedly. Just because you happened to go down one aisle instead of the next, you bump into an old acquaintance that you have not seen for years, or you happen to talk to the guy in line next to you to get a $5 Pepsi, and it turns into a great, new connection.
Real Time with... IPC APEX EXPO 2025: Schmoll America—Committed to Supporting Customers
03/31/2025 | Real Time with...IPC APEX EXPOKurt Palmer of Schmoll America and Stephan Kunz of Schmoll Maschinen GmbH had a great show, reporting solid attendance and good opportunities, as Schmoll America celebrates its first anniversary. With a booth full of equipment for attendees to see and touch, they showcased unique products like the Pico laser and X-ray machine, and discussed plans for a new facility.
North American PCB Industry Sales Up 11.3% in February
03/31/2025 | IPCIPC announced today the February 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 1.33.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.