Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."

Klaus Koziol - atg

Suggested Items

Siemens, NVIDIA Expand Agentic AI Collaboration for 3D IC Power and Thermal Design

10/21/2026 | Siemens
Siemens announced an expansion of its EDA agentic AI portfolio, developed in collaboration with NVIDIA.

Cadence InnoStack AI Agent Supports Socionext’s 3nm SoC Design

10/21/2026 | Cadence Design Systems
 Socionext Inc., a global leader in custom SoC design and development, is actively advancing its SoC design and development capabilities through agentic AI and expanding the application of AI-driven design to the physical design of large-scale system-on-chip (SoCs) using advanced process technologies.

From IPC Standards to Practical DFM

10/21/2026 | Marcy LaRont, I-Connect007
DFM seems like common sense: If we know the rules a PCB must meet, why not check the design against them before it ever reaches the factory? In practice, of course, it’s not quite that simple. I caught up with Susan Kayesar, product manager at Siemens and longtime contributor to Global Electronics Association standards activities, to talk about an ongoing effort between Siemens and the Association to translate IPC requirements into practical, software-based DFM checks. Susan explains where standards lend themselves to automation, where the gray areas begin, and why checking for IPC compliance is an important starting point, but not a substitute for understanding the capabilities and limitations of the fabricator who will actually build the board.

Polar, IC-Link by imec Partner on 8-Inch GaN Manufacturing

10/19/2026 | Polar Semiconductor, LLC
Polar Semiconductor, LLC (Polar), a U.S.-owned and operated foundry specializing in high-voltage, power, and sensor technologies, and IC-Link by imec, imec’s design and manufacturing service, announced they are collaborating to provide 8-inch production of enhancement-mode (e-mode) GaN devices to serve critical markets such as AI data centers, automotive, aerospace & defense, and the industrial grid.

ExpressPCB Plus 3.4 Checks the Whole Board Before You Order

10/19/2026 | ASC Sunstone Circuits
Free update adds full-board design rule checking, restores SnapMagic part downloads, and brings ExpressPCB Classic designs into the new DR
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in