Dan’s Biz Bookshelf: ‘Elevate: Push Beyond Your Limits'
The Marketing Minute: The First Step to More Sales—Marketing
It’s Only Common Sense: Customer Service Is Sales in Disguise
Indium's Dr. Jie Geng to Present at IPC Electronics Materials Forum
October 25, 2019 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation expert Dr. Jie Geng, Research Metallurgist, will share his knowledge at the IPC Electronics Materials Forum, November 5-7, Minneapolis, Minn., USA.
Dr. Geng will present Fluxes Designed for Suppressing Non-Wet-Open during BGA Assembly, which examines the increasing severity of warpage and non-wet-open (NWO) defects during BGA assembly due to the continuing advancement of miniaturization. He will discuss how a “cold-welding barrier” method utilizing a flux coating has been developed to suppress NWO defects.
He will also present A Novel Medium-Low Temperature Solder Paste, detailing the development of a new lead-free solder paste with a reflow peak temperature of 200°C. The finished solder joint melted between 180–200°C, allowing for a hierarchy assembly process with alloys that have melting temperatures around 140°C, 190°C, and 220°C.
Dr. Geng focuses on the development of novel lead-free high-reliability solder alloys for automotive applications. He also investigates the assembly process technologies in electronic packaging and interconnections. Dr. Geng earned his Ph.D. in Metallurgy from University of Surrey in the U.K. He continued as a materials scientist after graduation and has extensive experience on materials selection, design, processing, and characterization, especially on processing-structure-property relationships in various materials, including ultra-high temperature alloys, lightweight alloys (Al and Mg), magnetic materials, and ceramics. Dr. Geng is skilled in combinatorial and high-throughput material design using 3D printing and computer programming with Python. He has published more than 20 journal articles in the field of materials science and engineering. He also serves as a peer reviewer for numerous journals.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit www.indium.com.
Share on:
Suggested Items
Silicon Mountain Contract Services Enhances SMT Capabilities with New HELLER Reflow Oven
07/17/2025 | Silicon Mountain Contract ServicesSilicon Mountain Contract Services, a leading provider of custom electronics manufacturing solutions, is proud to announce a significant upgrade to its SMT production capability with the addition of a HELLER 2043 MK5 10‑zone reflow oven to its Nampa facility.
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.