American Made Advocacy: Smart Policies Can Ensure AI Data Centers Are Secure
Beyond the Board: Early Engagement Means Faster Prototyping for Defense Programs
Defense Speak Interpreted: The Autonomous Plane Battle—Skyborg Vs. Loyal Wingman
MMAB Group Upgrades Plating Process
August 30, 2019 | MMAB GroupEstimated reading time: Less than a minute
MMAB Group’s factory in Malmö is undergoing a major upgrade of several process steps. Summer was devoted in upgrading the company’s copper plating which is a critical step in the manufacture of printed circuit boards. The plating process coats holes and patterns with electrolytic copper and this requires a number of chemical baths and plating cells that are powered by high currents.
Production Manager Mats Hansson has worked with Roger Westin as project manager and Mikael Karlsson from Sweco, worked on replacing all rectifiers and control programs for production line. The rectifiers can deliver up to 800 Amps per piece.
Together with the new control program, the process can be controlled more precisely. The upgrade was a significant investment that will secure the production for many years to come.
The picture on the left shows bars with 3x6 rectifiers ready for installation.
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
Trouble in Your Tank: Understanding Interconnect Defects, Part 1
11/04/2025 | Michael Carano -- Column: Trouble in Your TankThis month, I’ll address interconnect defects (ICDs). While this defect continues to rear its ugly head, don’t despair. There are solutions, most of which center on process control and understanding the relationship of the chemistry, materials, and equipment. First, though, let’s discuss ICDs.
Target Condition: Distribution of Power—Denounce the Ounce
11/05/2025 | Kelly Dack -- Column: Target ConditionHave you ever wondered why the PCB design segment uses ounces to describe copper thickness? There’s a story behind all of this—a story that’s old, dusty, and more than a little absurd. (Note that I didn’t add “Like many of us.”) Legend has it that back in the days of copper tinkers and roofing tradesmen, the standard was set when a craftsman hammered out a sheet of copper until it weighed one ounce, when its area conveniently matched the square of the king’s foot.
WestDev Announces Advanced Thermal Analysis Integration for Pulsonix PCB Design Suite
10/29/2025 | WestDev Ltd.Pulsonix, the industry-leading PCB design software from WestDev Ltd., announced a major enhancement to its design ecosystem: a direct interface between Pulsonix and ADAM Research's TRM (Thermal Risk Management) analysis software.
Designers Notebook: Power and Ground Distribution Basics
10/29/2025 | Vern Solberg -- Column: Designer's NotebookThe principal objectives to be established during the planning stage are to define the interrelationship between all component elements and confirm that there is sufficient surface area for placement, the space needed to ensure efficient circuit interconnect, and to accommodate adequate power and ground distribution.
Episode 6 of Ultra HDI Podcast Series Explores Copper-filled Microvias in Advanced PCB Design and Fabrication
10/15/2025 | I-Connect007I-Connect007 has released Episode 6 of its acclaimed On the Line with... American Standard Circuits: Ultra High Density Interconnect (UHDI) podcast series. In this episode, “Copper Filling of Vias,” host Nolan Johnson once again welcomes John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, for a deep dive into the pros and cons of copper plating microvias—from both the fabricator’s and designer’s perspectives.