Flexible Thinking: Another PCB Design Paradigm Shift in the Works
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
Cree's Ralph Tuttle to Keynote SMTA's Electronics in Harsh Environments Conference
March 30, 2018 | SMTAEstimated reading time: Less than a minute
SMTA Europe has announced Keynote Speaker Ralph Tuttle of Cree Inc. on High Power LED Solder Joint Reliability at the "Electronics in Harsh Environments Conference" to be held in Amsterdam, Netherlands, on April 25, 2018.
Advances in LED technology now allow operation at much higher temperatures while still achieving high lumen output and long lifetimes. While traditional lead-free SAC 305 solder alloys are acceptable for LEDs operating in benign conditions, they are not as reliable when LEDs are operated at high temperatures since they drive high currents. This talk will discuss failure modes associated with LEDs operating under stressful conditions. The research into alloy modifications to package construction will be presented.
Share on:
Suggested Items
SMTA UHDI Symposium 2025, Part 2: State of the Art
01/29/2025 | Marcy LaRont, I-Connect007A group of about 50 attended the second annual SMTA Ultra High Density Interconnect Symposium on Jan. 23, 2025. After a morning of technical presentations on challenges and solutions regarding UHDI technology, we gathered for a delicious Mexican buffet lunch and some networking before reconvening for an afternoon of more technical topics.
Connect the Dots: Designing for Reality—Surface Finish
01/29/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the solder mask and legend process, one of the final steps in the PCB manufacturing process. The board is nearly complete. We just need to wrap up production by applying a surface finish to protect the copper from oxidation and facilitate soldering components onto the board.
AIM Solder Promotes Kelly Cardone to Vice President, Customer Experience
01/21/2025 | AIMAIM Solder, a global leader in solder assembly materials for the electronics industry, is thrilled to announce the promotion of Kelly Cardone to Vice President, Customer Experience. This promotion highlights AIM’s commitment to offering superior support and customer experience.
Indium to Showcase Durafuse Solder Technology at NEPCON Japan
01/21/2025 | Indium CorporationAs one of the leading materials providers in the electronics assembly industry, Indium Corporation® is looking forward to featuring its innovative Durafuse® solder technology at NEPCON Japan, taking place January 22-24, in Tokyo, Japan.
Peters Leverages Inkjet Technology to Optimize PCB Manufacturing
01/17/2025 | PetersPeters has put the second SUSS LP50 ‘Pixdro’ inkjet printer into operation. This machine enables the application of solder resist in digital additive technology by means of the inkjet process, thus providing Peters Research, in this relatively new segment, with more possibilities in research and process technology, in addition to the conventional coating processes (screen printing, curtain coating and spray coating).