Standard of Excellence: Anticipating Customer Needs Early and Often
The Knowledge Base: At the Forefront of Electronics Manufacturing
Global Citizenship: Training the Next Generation of Talent
Successful Pre-acceptance of TSK Schill GmbH Production Line for Moulded Etched Parts
December 16, 2024 | TSK Schill GmbHEstimated reading time: 1 minute
The specialist for horizontal wet systems for the production of printed circuit boards, chemical milling and moulded etched parts, TSK Schill GmbH from Gäufelden-Nebringen, is installing new production systems at one of the leading manufacturers of precision metal parts.
Metaq GmbH, based in Wuppertal, is one of the new customers who rely on the competence and experience of TSK Schill for the comprehensive renewal of their etching technology systems.
In November 2024, a system was installed on schedule that will cover three of the four main production steps. From the preparation of the materials in thicknesses of 0.1 to 1 millimeter to the actual etching process and the post-processing of the parts, the individual modules of the system offer innovative technology and modern production processes.
The client's requirements were clearly defined: very good energy efficiency, a high degree of digitalization and automation, and continuous monitoring of the production process for optimal control of the manufacturing parameters. The TSK Schill team
GmbH has accepted this challenge and will continue to intensively accompany the process of commissioning the plant even after the successful preliminary acceptance.
Thomas Schill, Managing Director of TSK Schill GmbH, thanks Metaq GmbH for the trust it has placed in us and assures his customer Claudia Schemann, Managing Director of Metaq GmbH, of a continued constructive and cooperative cooperation.
Etching technology is a photochemical process for the dimensionally accurate production of metal moulded parts. The precision parts are manufactured with an accuracy of hundredths of a millimeter - without mechanical or thermal stress on the material. The result is burr- and stress-free parts that can be produced quickly and economically thanks to digital tools.
Share on:
Suggested Items
NAND Flash Prices Begin to Recover in 2Q25 as Production Cuts and Inventory Rebuilding Take Effect
03/26/2025 | TrendForceTrendForce reports that NAND Flash suppliers began reducing production in the fourth quarter of 2024, and the effects are now starting to show. In anticipation of potential U.S. tariff increases, consumer electronics brands have accelerated production, further driving up demand.
AT&S Sets New Standards in the Recycling of Copper and Chemicals
03/25/2025 | AT&SAT&S has been working for years to reduce the ecological footprint of its production sites worldwide with a comprehensive sustainability strategy and considerable investments.
Dr. Thomas Marktscheffel of ASMPT Honored for his Work on Open Interfaces
03/25/2025 | ASMPTDr. Thomas Marktscheffel, Director Product Management Software Solutions at ASMPT, was honored by the IPC at this year's IPC APEX EXPO in Anaheim, California, for his many years of commitment to the organization. The non-proprietary interface standards he helped develop form the basis for ASMPT’s intelligent factory concept.
Datest to Highlight Flying Probe Programming and X-ray Testing Services at Upcoming SMTA Texas Expos
03/25/2025 | DatestDatest, a leading provider of integrated PCBA testing, imaging, inspection, and failure analysis services for the electronics industry, is excited to announce it will exhibit in the upcoming SMTA Dallas Expo on Tuesday, April 1st, and the SMTA Houston Expo on Thursday, April 3rd, 2025.
New COO to Drive Operational Excellence at ESCATEC
03/24/2025 | ESCATECGrowth-orientated electronics manufacturing services (EMS) provider, ESCATEC, intends to maximise operational efficiencies with the appointment of industry expert Alessandro Marinai as its new Chief Operating Officer (COO).