Standard of Excellence: The Power of Personalization in Customer Care
Global Citizenship: Cultural Nuances Around the World
The Government Circuit: Four Things to Know About IPC Advocacy in 2025
ZESTRON South Asia releases whitepaper – Impact of Cleaning Technology on Discrete Packaging - The Difference in Wire Bonding Yield
December 2, 2024 | ZESTRONEstimated reading time: 1 minute
ZESTRON, the global leading provider of high precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, is pleased to release the whitepaper “Impact of Cleaning Technology on Discrete Packaging - The Difference in Wire Bonding Yield”
Whitepaper Abstract:
Lead frame packages are commonly used in semiconductor package fabrication, where interconnections between the integrated circuits (IC) and the metal leads are typically established through die attach and wire bonding processes. Standard materials like epoxies, adhesives, or solder pastes are most often used in the die attach process. However, it is critical to remove any flux residues left behind after soldering before proceeding with wire bonding and molding to ensure maximum yield in packages that use solder paste for die attachment. One of the most widely used cleaning agents to remove flux residues is isopropyl alcohol (IPA). While IPA is commonly used as a general cleaner in the electronics industry, it is not the most effective solution for flux removal.
Semiconductor package manufacturers produce millions of units daily and therefore, a small improvement in the wire bonding yield can significantly impact production efficiency and the overall product costs.
One such OEM was producing lead frame packages and using IPA (Isopropyl alcohol) in the ultrasonic cleaning process. However, their process resulted in a wire bonding yield of only 98%, measured after the molding and deflashing processes. This indicated significant motivation to improve the cleaning process and the wire bonding yield.
A Design of Experiment (DOE) was developed to assess alternative cleaning agents and process equipment, aiming to optimize the cleaning process and to be evaluated based on the improvement in wire bonding yield. Process qualification was conducted through a pull test according to the MIL-STD-883E method 2011.7. Throughout the DOE process iterations, process improvements were identified through visual inspection, pull and shear testing as well as overall yield measurement from the wire bonding process.
Share on:
Suggested Items
KYZEN to Showcase MICRONOX MX2123 Power Module Cleaner at IMAPS Device Packaging Conference 2025
02/21/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the International Symposium on Microelectronics (IMAPS) International Conference and Exhibition on Device Packaging scheduled to take place March 3-6 at the Sheraton Grand at Wild Horse Pass in Phoenix, AZ.
Are Domestic Assemblers Ready for the Next Level of Electronics Miniaturization?
02/19/2025 | Chrys Shea, SHEA Engineering ServicesUHDI technology is more than another evolutionary level of miniaturization. It’s a fundamental change in how we create circuit boards, on a scale potentially as impactful as the transition from through-hole to surface mount was 40 years ago.
I-Connect007 Welcomes New Milaero Columnist Jesse Vaughan
02/18/2025 | I-Connect007 Editorial TeamI-Connect007 is excited to announce the addition of a new monthly column, “Beyond the Board,” authored by Jesse Vaughan, a seasoned expert in the PCB/milaero sector. Jesse, a third-generation printed circuit board technologist currently working at Summit Interconnect, brings a wealth of knowledge and passion to our publications.
SEHO to Highlight Cutting-Edge Soldering Technology at IPC APEX Expo 2025
02/17/2025 | SEHOSEHO, a worldwide leading manufacturer of complete solutions for soldering processes and automated production lines, is thrilled to present its best-selling selective soldering system SEHO SelectLine-C at the IPC APEX Expo 2025 in Anaheim.
Altus Group Launches New X-ray Inspection Services for Electronics Manufacturers
02/17/2025 | Altus GroupAltus Group, a leading distributor of production equipment and consumables for the electronics manufacturing sector in the UK and Ireland, is pleased to announce the launch of its new X-ray inspection services.