Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
PCB Layout Rules of Thumb for Consideration
November 25, 2024 | Patrick Davis, Cadence Design SystemsEstimated reading time: 1 minute
Just because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
While many aspects of PCB layout are governed by procedures, standards, and workflows, there is still much that belongs only to tribal knowledge. Unless this knowledge is collected, documented, and incorporated into a design database, it will only exist in the information that gets passed from one designer to the next. Let’s take a look at some of the more common PCB layout rules of thumb and see how they apply to the boards we are currently laying out.
Start with a Plan
Something that you probably won’t ever find printed in a company procedure or a PCB design tutorial is the importance of having a plan before you start. Many layout designers have been known to plunge right into a new design, without first considering all the ramifications of what they are doing. This can lead to routing frustrations and eventual changes to the placement to complete the design correctly. To avoid problems like these, give some thought to what you are trying to accomplish before you start placing parts.
To read this entire article, which appeared in the November 2024 issue of Design007 Magazine, click here.
Share on:
Suggested Items
PCBA Market to Reach $147.5 Billion by 2035, Growing at a CAGR of 4.7% from 2025
06/27/2025 | PRNewswireThe Printed Circuit Board Assembly market is projected to reach $147.5 billion by 2035, up from an estimated $90.91 billion in 2025, growing at a steady CAGR of 4.7% during the forecast period.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Summit Interconnect Participates in PCBAA Annual Meeting to Advance U.S. Electronics Policy
06/26/2025 | Summit Interconnect, Inc.Summit Interconnect was proud to participate in the 2025 Annual Meeting of the Printed Circuit Board Association of America (PCBAA), held in Washington, D.C. this June.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.